Clarion VX709E Owner's Manual & Installation Manual page 78

Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.)
Center Panel *2
Note:
*2 Some panel openings are too small for the unit
depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the
panel frame by about 0.5 to 1.5 mm so the unit
can be inserted smoothly.
Example 1
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
●Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in "INSTALLING THE
MAIN UNIT" (see page 75).
76
VX709E
Main Unit
*3
Figure 7
*3 If a hook on the installation bracket interferes
Typical Mounting Brackets
Example 2
Affix the screws to the ● marks.
8-Hexagonal screw
(M5 u 8)
Mounting bracket
(1 pair for the left and right
sides)
with the unit, bend and flatten it with a nipper or
similar tool.
Example 3