9. Disconnect the connector (G51) and remove the G-
Board.
7.21. Remove the Speakers
1. Disconnect the relay connectors
2. Remove the screws (×4
Speaker (L, R).
7.22. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1
each).
each) and remove the
24
2. Remove the cabinet assy and the plasma panel fastening
, ×6
screws (×8
).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
).