Samsung RS26MBZBL User Manual page 8

Removing the Fridge Door
1. With the door closed, remove the upper hinge
cover 1 using a screwdriver.
1
2. Remove hinge bracket
screw by turning counter-clockwise, and
2
take off the upper hinge
door does not fall on you as you are removing
it.
2
3
4
Be careful not to miss the parts of
refrigerator.
3. Remove the door from the lower hinge
lifting the door straight
up 6 .
4. Remove the lower hinge
by gently lifting the lower hinge upwards.
8
Reattaching the freezer doors
To reattach the freezer doors, assemble
parts in reverse order.
8_
setting up
DA99-03327E (EN+FR+AR)-0.1.indb Sec4:8 DA99-03327E (EN+FR+AR)-0.1.indb Sec4:8
LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator,
you want to make sure the refrigerator is level
so that you can make fi nal adjustments. If the
refrigerator is not level, it will not be possible to get
the doors perfectly even.
Before levelling the refrigerator,
remove the front leg cover
3 and the ground
Open both the freezer and fridge doors, and then
take off the front leg cover by turning the three
. Be careful that the
4
screws counter-clockwise.
When the Freezer door is lower
than the fridge
5 by
Insert a fl at-blade screwdriver into a slot on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
When the Freezer door is higher
than the fridge
Insert a fl at-blade screwdriver into a slot on the
Leg, turn it clockwise or counter clockwise to level
the fridge.
from the bracket
7
The front of the refrigerator is also adjustable.
Leg
Leg
Screw Driver
Refer to the next section for the best way to
make very minor adjustments to the doors.
Screw Driver
2011.7.11 11:56:46 AM 2011.7.11 11:56:46 AM