Listening To Music From A Bluetooth Device - Yamaha YSP-1600B Owner's Manual

Listening to music from a Bluetooth device

Pairing a Bluetooth device with the unit
1
Press the BLUETOOTH key on the remote control.
Bluetooth is selected as the input.
BLUETOOTH
• If you are unable to select Bluetooth as an input source, be sure that the
following settings have been applied.
– "Bluetooth" in the setup menu is set to "On" (p. 57)
– "Transmission" in the setup menu is set to "Off" (p. 57)
2
Turn on the Bluetooth device to be paired, and
perform pairing.
The operation varies depending on the device. Refer to the
instruction manual supplied with the device.
3
Select "YSP-1600" in the Bluetooth device list on
the device.
If a passkey (PIN) is required, enter the number "0000".
YSP-1600
When pairing is completed,
appears on the Bluetooth device.
The indicator on the unit's front panel flashes while the
unit and Bluetooth device are being paired, and glows
steadily when pairing is complete.
BLUETOOTH
Glows
PIN 0 0 0 0
1 2 3
4 5 6
7 8 9
0
or a completion message
PLAYBACK ➤ Wireless playback of audio via Bluetooth connection
4
Play back a song on the Bluetooth device.
• Perform pairing with the Bluetooth device and unit within 10 m (33 ft) of each
other.
• The unit can be paired with up to 20 Bluetooth devices for receiving and
transmitting audio. If a new device is successfully paired with the unit after 20
other devices have already been paired, the device with the earliest connecting
date will have been unpaired to make room for the new device.
• If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed with step 1. Terminate
this connection to pair a new device.
• Refer to "Bluetooth" (p. 64) in "Troubleshooting" if paring is not possible.
27
En