Table of Contents
Advertisement
Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the slot at an angle of about 20 degrees. Press the
memory module firmly, and pivot it downwards until it snaps into place. Ensure that the memory module is
firmly installed in the slot and does not move easily.
1060 Hard disk drive assembly or solid-state drive assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 68
•
"1020 Bottom cover" on page 68
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or is in suspend mode.
Removal steps of the hard disk drive assembly or solid-state drive assembly
.
Chapter 9
Removing or replacing a FRU
73
Advertisement
Table of Contents
