BMW M4 COUPE Owner's Manual page 219

Using the button
Press the button and select the desired
program on the Control Display.
Via iDrive
It is possible to configure the required program
for buttons M1 or M2.
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"
4. Deactivate DSC, if needed.
5. "M xDrive"
6. Select the desired program.
The setting is immediately applied with active
M1 or M2 configuration.
To activate the desired configuration with the se‐
lected settings, press the corresponding button
on the steering wheel:
▷
▷
Display in the instrument cluster
Icon Description
The indicator light is illuminated
and 4WD appears in the instru‐
ment cluster:
"4WD" is activated.
The indicator light is illuminated
and 4WD Sport appears in the
instrument cluster:
"4WD SPORT" is activated.
The indicator lights are illumi‐
nated and 2WD appears in the
instrument cluster:
"2WD" is activated.
Driving stability control systems
Online Edition for Part no. 01405A38097 - VI/21
M Traction Control
Principle
M Traction Control permits the gradual adjust‐
ment of the wheel-slip behavior of the rear
wheels during acceleration by regulating the driv‐
ing power accordingly.
General information
If DSC is deactivated after the idle state, the M
Traction Control level OFF/Level 0 is set.
Safety information
Warning
The deactivation of the Dynamic Stability Con‐
trol DSC limits the driving stability. Depending
on the selected setting of the M Traction Con‐
trol, the minor or major wheelspin is possible,
which limits the tracking, e.g., while accelerat‐
ing. There may be a risk of accident or risk of
damage to property. Adjust driving style to traf‐
fic conditions. Watch traffic closely and actively
intervene where appropriate.
Functional requirement
The DSC Dynamic Stability Control is deacti‐
vated.
Additional information:
DSC Dynamic Stability Control, refer to
page 215
CONTROLS
219