BMW M4 COUPE Owner's Manual page 144

CONTROLS
Switching via the shift paddles
▷ Shift up: pull right shift paddle.
▷ Shift down: pull left shift paddle.
Display on the selector lever
The actually engaged transmission position can
deviate from the selector lever position in some
situations. The display in the selector lever
flashes.
Observe the display in the instrument cluster in
these cases.
Displays in the instrument
cluster
Drive mode
▷ Engaged gear together with a
D, arrow 1.
▷ Selected Drivelogic program,
arrow 2.
Sequential mode
▷ Gear shift indicator, arrow 1.
▷ Engaged gear, arrow 2.
▷ Selected Drivelogic program,
arrow 3.
Notice
When the external temperature is very low, the
display may not work. Current driving direction is
recognizable at the engaged selector lever posi‐
tion.
144
Driving
Online Edition for Part no. 01405A38097 - VI/21
Low Speed Assistant
Principle
The Low Speed Assistant gives assistance at
very low speeds. The vehicle moves at walking
speed.
General information
Use the Low Speed Assistant for maneuvering or
in stop-and-go traffic.
The Low Speed Assistant can also be used for
rocking the vehicle in the snow. To do this,
change over between reverse gear and forward
gear without stepping on the brakes in the proc‐
ess.
Activating
1. Switch on drive-ready state while pressing on
the brake pedal.
2. If necessary, release the parking brake.
3. If necessary, deactivate Automatic Hold.
4. Engage selector lever position D/S or R.
5. Release brake.
In 1st and 2nd gear and in reverse, the vehicle
rolls at minimum speed.
Deactivating
Decelerate the vehicle to a stop.
Drivelogic
Principle
Drivelogic changes the gear-shifting characteris‐
tics of the M Steptronic Sport transmission.
For example, the shifting points are changed in
Drive mode and the shifting times in sequential
mode.
General information
Three Drivelogic programs are available.