Connection Panel
(depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
or
cable television
network
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA´ connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCAˇ and RCA¨ connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player. (When using the
mono equipment, connect to the AUDIO-L input connector.)
The RCAˆ connectors are used for equipment such as a
DVD with component output
(480i
only).
English - 1