Dell OptiPlex 5490 Service Manual page 94

Table 11. System setup options—Security menu (continued)
Security
UEFI Boot Path Security
Table 12. System setup options—Passwords menu
Passwords
Admin Password
System Password
NVMe SSD0
Password Configuration
Upper Case Letter
Lower Case Letter
Digit
Special Character
Minimum Characters
Password Bypass
Password Changes
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Master Password Lockout
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
94 System setup
By default, the option is enabled.
Controls whether or not the computer will prompt the user to enter the admin
password (if set) when booting to a UEFI boot device from the F12 boot menu.
By default, the Always Except Internal HDD option is enabled.
Set, change, or delete the administrator password.
Set, change, or delete the computer password.
Set, change, or delete the NVMe SSD0 password.
Reinforces password must have at least one upper case letter.
By default, the option is disabled.
Reinforces password must have at least one lower case letter.
By default, the option is disabled.
Reinforces password must have at least one digit.
By default, the option is disabled.
Reinforces password must have at least one special character.
By default, the option is disabled.
Set the minimum characters allowed for password.
When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.
By default, the Disabled option is enabled.
Enable or disable to change computer and hard drive password without the
need for admin password.
By default, the option is enabled.
Enables administrators control over how their users can or cannot access BIOS
setup.
By default, the option is disabled.
When enabled, this will disable the master password support.
By default, the option is disabled.
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.