Dell OptiPlex 5490 Service Manual page 91

Table 6. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Camera
Audio
Enable Audio
USB Configuration
Side USB Configuration
Rear USB Configuration
Table 7. System setup options—Storage menu
Storage
SATA Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA HDD
Type
Device
M.2 PCIe SSD-0
Type
Device
M.2 PCIe SSD-1
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enables or disable the camera.
By default, the Enable Camera option is selected
Enable or disable the integrated audio controller.
By default, all the options are enabled.
● Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Enable or disable the individual side USB ports.
By default, the Side USB Port 1 (Bottom) and Side USB Port 2
(Top)option are enabled.
Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the RAID On option is enabled.
Enable or disable the onboard drives.
By default, SATA HDD, M.2 PCIe SSD-0, and M.2 PCIe SSD-1 options are
enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the M.2 PCIe SSD-0 type information of the computer.
Displays the M.2 PCIe SSD-0 device information of the computer.
Displays the M.2 PCIe SSD-1 type information of the computer.
Displays the M.2 PCIe SSD-1 device information of the computer.
Enable or disable the SD card.
System setup 91