Connector Changes - Garmin GNC 300 Installation Manual

APPENDIX B CONNECTOR CHANGES
STAMPED CONTACT CONNECTOR USAGE
Garmin panel mount GPS radios have previously been shipped with stamped crimp type contacts. All
products are now being shipped with machined mil-spec contacts with color-coded barrels. The following
figures can be used to identify which type contact you have:
Some contacts are pins as shown, while others are the socket type. The type used will vary with the
installation. When working with the stamped crimp type contacts, the following tools should be used:
Tools 37 and 9 position connectors
supplier Crimp Tool
Amp 58448-2
ITT Cannon 995-2000-000
Cinch HTD-544
Part numbers shown are not maintained by Garmin and consequently are subject to change without notice.
Special considerations must be made for aircraft power and remote battery (optional) connections, as shown
in the following diagram:
26 position connector
Extraction Tool Crimp Tool
91067-22 90430-1
980-0008-124 995-2000-022
CIET-20-HDB HTD-544
Extraction Tool
91285-1
980-00004-804
HTD-520
6‰ÃFv‡ÃD†‡hyyÃHhˆhy
(%&!ÃSr‰ÃE
QhtrÃ#"