Cooking; Keep Warm - Panasonic NN-SN67KS Owner's Manual

Cooking

1
If cooking at high power (10),
skip to step 2. Press Power
Level until the desired power
level appears in the display.
P10 is the highest and P1 is the
lowest. P0 is the keep warm
feature.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MED-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MED-LOW)/
DEFROST
9 times P2
10 times P1 (LOW)
11 times P0 (KEEP WARM)
2
Set cooking time using the
Number pads. P10 (HIGH) and
P0 (KEEP WARM) have max.
cooking time of 30 minutes. For
other power levels, the max.
time is 99 minutes, 99 seconds.
Operation (continued)
3
Press Start; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
1. For reheating, use P10 (HIGH)
for liquids, P7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use P3
(MED-LOW).
3. After pressing Start, the
selected power level can
be recalled. Hold Power
Level for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
DO NOT OVERCOOK:
This oven requires less time
to cook than older units.
Overcooking will cause food to
dry out and may cause a fire.
A microwave oven's cooking
power tells you the amount of
microwave power available for
cooking.
Multistage Cooking:
For more than one stage of
cooking, repeat steps 1 and 2
for each stage of cooking before
pressing Start. The maximum
number of stages for cooking
is three. When operating, two
beeps will sound between each
stage. Five beeps will sound at
the end of the entire sequence.
Automatic function (such as
Frozen Foods, Sensor Cook
(Reheat), Popcorn, Coffee/Milk
and Turbo Defrost) can not be
used with 3 stage cooking.

Keep Warm

(Will keep food warm for up to 30 minutes after cooking)
1
Press Power Level 11 times to
select the P0 (KEEP WARM).
2
Set warming time using
Number pads (up to
30 minutes). Set 20 minutes
cooking for an example.
3
Press Start; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
12
NOTES:
1. P0 (KEEP WARM) can be set
as the final stage after cook
time has been manually
entered. It cannot be used
with Automatic function
(such as Frozen Foods,
Sensor Cook (Reheat),
Popcorn, Coffee/Milk and
Turbo Defrost.
2. After pressing Start, the
selected power level can
be recalled. Hold Power
Level for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.