Table of Contents
Advertisement
Video Recorder, Satellite Receiver or Camrecorder
Connection
1
Connect the »EURO-AV« socket on the television set to the corresponding
socket on the video recorder or satellite receiver with a EURO/AV (Scart)
cable.
Teletext mode is not possible if the satellite receiver is connected via the
Euro-AV socket.
If the satellite receiver also has an HF aerial output, this socket can be used
to enable teletext mode.
Use a conventional adapter cable to connect a camcorder.
Operation
0 button, »AV« will appear.
1
Press the
AV
Start playback on the video recorder or camcorder or switch on the satellite
receiver.
– The recorder playback or the satellite receiver channel will appear on the
screen.
Video playback via the aerial socket
The video recorder can also be connected to the set aerial socket
aerial must then be connected to the aerial socket on the video recorder.
To view the recorder playback a channel position on the set must be tuned
to the video recorder, see setting in the chapter "Manually Assigning Chan-
nel Positions", on page 6.
EURO-AV
AUDIO
EURO-AV
É
. The
11
Advertisement
Table of Contents
