Canon PIXMA MX870 Series Getting Started page 16

7
H
G
E
F
1. Lift the Scanning Unit (Cover) (E) slightly.
2. Fold the Scanning Unit Support (F) towards the left.
3. Close the Scanning Unit (Cover).
• Do not touch the buttons or LCD (G) on the Operation Panel (H). May result in unintended operation.
1
5 Install the Ink Tanks
8
Make sure that the LCD changes as shown in the
illustration and go to the next step.
Load plain paper in the Cassette by referring to "6 Load Paper"
on page 15 and press the OK button.
• It takes about 4 minutes before the LCD changes.
• The machine may make some operating noises when
preparing to print. This is normal operation.
• If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.
• The LCD will turn off if the machine is not operated for
about 5 minutes. To restore the display, press any button
except the ON button.