5
1
1. Remove the orange tape
completely.
2. Remove the protective film
completely.
•
•
1
Handle the ink tanks carefully.
Do not drop or apply excessive
pressure to them.
Be sure to use the supplied ink
tanks.
2
A
B
Hold the ink tank with the orange
protective cap (A) pointing up while
being careful not to block the L-shape
air hole (B).
•
If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print
properly.
•
If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash.
•
Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may stain
your hands if you touch them.
3
C
D
Slowly twist the orange protective cap 90 degrees
horizontally to remove it off.
Do not push the sides of the ink tank.