Information Codes - Samsung DW60M9970 Series User Manual

Information codes

If the dishwasher fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code
Leakage check
• Close the water supply valve. Go to your home's circuit breaker panel,
LC and set the dishwasher's circuit breaker switch to off. Then, contact the
installer to repair. If the issue continues, contact a local Samsung service
centre.
Water supply check
• Check if the water supply valve is closed, if the water supply is
4C
suspended, or if the water inlet valve or line is frozen or clogged by
foreign particles. If the issue continues, contact a local Samsung service
centre.
Drain check
• Close the water supply valve. Check if the drain hose is clogged or
5C
folded. Check if the drain hole inside the pump is clogged. If the issue
continues, contact a local Samsung service centre.
High temperature heating check
• Functional check. With the dishwasher empty, add detergent, and then
HC
run a cycle. If the issue continues, go to your home's circuit breaker
panel, and set the dishwasher's circuit breaker switch to off. Then,
contact a Samsung service centre.
Pump operation check
3C • Functional check. Turn off the dishwasher and restart. If the issue
continues, contact a Samsung service centre.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
DW9000M_DD68-00191L-00_EN.indd 45
Action
English 45
2019-02-28 4:53:33