Advertisement
Quick Links
REPAIR
DW6*M****F*
DISHWASHER
Basic Model
Model Name
Model Code
DISHWASHER
DW6*M****U*
:
DW60H6050 Series
DW60H5050 Series
:
DW60M6050 Series
DW60M6040 Series
:
DW60M6050FS
DW60M6052FS
DW60M6050US
DW60M6051US
DW6BM6051US
DW60M6031SS
DW60M6051BB
DW60M6070IB
DW60M6040FW DW60M6040US
DW60M6040UW DW60M6042US
DW60M6044US
DW6KM6041SS
DW6KM6041BB
DW60M5050FW DW60M5050BB
DW6KM5031BB
Guide
* For End User.
DW6*M****S*
DW60M6050FW
DW60M6052FW
DW60M6050UW
DW60M6051UW
DW60M6050SS
DW60M6050BB
DW60M6031BB
DW60M6040FS
DW60M6040SS
DW60M6040BB
DW60M5050FS
DW60M5070IB
DW6*M****BB
DW6*M****IB
Advertisement
Related Manuals for Samsung DW60H6050 Series
Summary of Contents for Samsung DW60H6050 Series
- Page 1 DISHWASHER Basic Model DW60H6050 Series DW60H5050 Series Model Name DW60M6050 Series DW60M6040 Series Model Code DW60M6050FS DW60M6050FW DW60M6052FS DW60M6052FW DW60M6050US DW60M6050UW DW60M6051US DW60M6051UW DW6BM6051US DW60M6050SS DW60M6031SS DW60M6050BB DW60M6051BB DW60M6031BB DW60M6070IB DW60M6040FS DW60M6040FW DW60M6040US DW60M6040UW DW60M6042US DW60M6044US DW60M6040SS DW6KM6041SS DW60M6040BB DW6KM6041BB...
-
Page 2: Important Safety Notice
Any damage to the product caused by an attempt to repair the product by any person other than a Samsung certified service provider will not be covered by the warranty. -
Page 3: Tools For Removal And Reassembly
4. Pull out the unit from the sink and lay it on the floor. Be careful of the drain hose when pulling out the unit. 5. For materials and repair information related to self-repair, refer to the web site : www.samsung.com/support Disassembly and Reassembly _ 3... -
Page 4: Standard Disassembly Drawings
2. STANDARD DISASSEMBLY DRAWINGS 2-1. PRECAUTION Caution Before servicing, - Make sure to remove all items include baskets inside dishwasher. - Drain the water in the dishwasher and disconnect the power supply. - Lock the water faucet that connected with inlet hose. - Uninstall the dishwasher from the furniture cabinet except simple work. - Page 5 2-2. CAP CASE BRAKE / GASKET BRAKE - Cap Case Brake : DD81-01387A / SVC-AIR BREAKER NUT - Gasket Brake : DD81-01388A / SVC-SEAL RING Part Figure Description [DISASSEMBLY] 1. Remove 3 screws that connect left SIDE PANEL to front side of dishwasher. - Type A: DD81-02693A / 2 pcs - Type B: DD81-02694A / 1 pc Warning...
- Page 6 Part Figure Description 4. Take off the left SIDE PANEL. Warning Do not this work without safety gloves. It can cause injury from sharp edge. 5. Take off the CAP CASE BRAKE by rotating to counter-clockwise direction with long-nose pliers. Caution It can be broken easily when you use iron part of the pliers.
- Page 7 2-3. DOOR HINGE - Door Hinge : DD82-01505A, DD82-01506A / SVC ASSY-DOOR LINK R, L (except DW60M****IB) Part Figure Description [DISASSEMBLY] * PREPARATION: Remove SIDE PANEL Left & Right refer to the section of ‘CAP CASE BRAKE / GASKET BRAKE’. 1.
- Page 8 Part Figure Description Hook Hook 4. Remove 2 terminals that connected to DETERGENT DISPENSER, and 1 ground wire that connected to BRACKET DOOR FRAME. Warning Be sure to remove the power plug before servicing. Caution Pay attention to hook of terminals. DOOR HINGE (except DW6*M****IB)
- Page 9 Part Figure Description GUIDE HINGE 6. Push both ribs of GUIDE HINGE to pull out the DOOR. Warning Do not this work without safety gloves. It can cause injury from sharp edge of broken parts. About 15˚ 7. Do same work at the opposite side, and pull out the DOOR INNER assembly to the direction of about 15˚.
- Page 10 Part Figure Description [ASSEMBLY] 1. Assemble the DOOR HINGE assembly and BRACKET DOOR FRAME with machine screws. - Screws for DOOR HINGE assembly: DD81-02764A / 4 pcs - Screws for BRACKET DOOR FRAME: DD81-02728A / 2 pcs Warning Do not this work without safety gloves. It can cause injury from sharp edge.
- Page 11 Part Figure Description 5. Connect the wire harness to Sub PBA. Caution Make sure the Wire harness are not getting stuck in other parts. DW6*M****F*/DW6*M****U*/DW6*M****SS NOTE : Incase of DW6*M5*** models, place the DOOR SWITCH assembly on the CONTROL PANEL also. DW6*M****BB/DW60M****IB 6.
- Page 12 - Door Inner : DD82-01494B / SVC ASSY-INNER DOOR (DW60M6070IB) DD82-01619B / SVC ASSY-INNER DOOR (DW60M5070IB) - Door Hinge : DD82-01773A, DD82-01774A / SVC ASSY-DOOR LINK L, R (DW60M****IB) Part Figure Description [DISASSEMBLY] * PREPARATION: Disassemble DOOR OUTER, CONTROL PANEL, WIRE HARNESS and SIDE PANEL 1.
- Page 13 Part Figure Description 3. Remove the 2 screws(at each side / Total 4 pcs) fixing DOOR INNER. Caution Be careful not to dent the DOOR INNER during disassembly. DOOR INNER / DOOR HINGE (DW60M****IB) 4. Remove the stopper carefully. Caution Do not this work without safety gloves.
- Page 14 Part Figure Description 5. Remove the stopper carefully. Warning Do not this work without safety gloves. It can cause injury from sharp edge. Warning Be careful not to pop out the spring while disassembly. It can cause serious injury. NOTE : DOOR HINGE will be serviced with DOOR INNER DOOR INNER / together by DOOR INNER assembly(SVC ASSY-...
- Page 15 Part Figure Description 2. Hang the DOOR HINGE to the hole of the spring. Warning Do not this work without safety gloves. It can cause injury from sharp edge. DOOR INNER / DOOR HINGE 3. Assemble the stopper carefully. (DW60M****IB) Warning Do not this work without safety gloves.
- Page 16 Part Figure Description 5. Remove pin DOOR INNER / NOTE : DOOR HINGE After servicing DOOR INNER assembly, assemble (DW60M****IB) WIRE HARNESS, DOOR OUTER, CONTROL PANEL and SIDE PANEL. 16 _ Disassembly and Reassembly...
- Page 17 2-4. HOLDER HINGE - Holder Hinge : DD81-01367A / SVC-GUIDE DOOR LINK Part Figure Description [DISASSEMBLY] * PREPARATION: Disassemble SIDE PANEL left & right. 1. Remove HOLDER ROPE DOOR from the DOOR HINGE left & right with the DOOR closed. Warning Be sure to remove the power plug before servicing.
- Page 18 2-5. SEAL TUB PACKING - Seal Tub Packing : DD81-01381A / SVC-GASKET TUB Part Figure Description [DISASSEMBLY] 1. Pull out the old seal from the BRACKET SEAL TUB. Warning Seal tub packing Be sure to remove the power plug before servicing. Warning Be careful to touch the BRACKET SEAL TUB after removed the seal.
- Page 19 Part Figure Description 3. Put Seal in the left & right side of the bottom. NOTE : The folded seal is about 3~4 cm long. About 3~4 cm SEAL TUB PACKING 4. Press the seal from the top corner toward remaining side.
- Page 20 2-6. ROTOR LOWER / ASSY DUCT NOZZLE - Rotor Lower : DD81-01847A / SVC-NOZZLE LOWER - Assy Duct Nozzle : DD82-01501A / SVC ASSY-DUCT NOZZLE (DW6*M6***) DD82-01646A / SVC ASSY-DUCT NOZZLE (DW6*M5***) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher's door, and remove the ROTOR LOWER.
- Page 21 Part Figure Description Sump [ASSEMBLY] 1. Put the HOLDER ROTOR LOWER on the SUMP. Caution Pay attention to assemble the HOLDER ROTOR LOWER correctly. There’re risks of leakage or poor performance when it’s misassembled. Guide of Holder Bottom of Holder ROTOR LOWER / ASSY DUCT NOZZLE...
- Page 22 Part Figure Description 3. Fasten 2 screws to fit the ASSY DUCT NOZZLE. - Screws: DD81-02718A / 2 pcs ROTOR LOWER / ASSY DUCT NOZZLE 4. Put the ROTOR LOWER onto the HOLDER ROTOR LOWER. 22 _ Disassembly and Reassembly...
- Page 23 2-7. ASSY ROTOR MIDDLE - Assy Rotor Middle : DD82-01500A / SVC ASSY-MIDDLE NOZZLE Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET MIDDLE. 2. Release 2 hooks to take off ASSY ROTOR MIDDLE from the BASKET MIDDLE. Caution Be careful not to break the hooks.
- Page 24 2-8. COARSE FILTER / FINE FILTER / MICRO FILTER - Coarse Filter : DD81-02452A / SVC-FILTER COARSE - Fine Filter : DD81-02454A / SVC-FILTER FINE - Micro Filter : DD81-02453A / SVC-FILTER MICRO Part Figure Description [DISASSEMBLY] 1. Turn the COARSE FILTER counter-clockwise to unlock the filter assembly.
- Page 25 2-9. BASKET MIDDLE / ASSY ADJUSTER / BRACKET ADJUSTER - Basket Middle : DD82-01496E / SVC ASSY-BASKET UPPER (DW6*R707***/DW6*R705***) DD82-01496F / SVC ASSY-BASKET UPPER (DW6*R704***) - Assy Adjuster : DD82-01719B, DD82-01720B / SVC ASSY-ADJUSTER L, R) - Bracket Adjuster : DD82-01717A, DD82-01718A / SVC ASSY-BRACKET ADJUSTER-LEFT, RIGHT Part Figure Description...
- Page 26 2-10. BASKET LOWER - Basket Lower : DD82-01498* / SVC ASSY-BASKET LOWER (DW6*M6***) DD82-01645A / SVC ASSY-BASKET LOWER (DW6*M5***) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET LOWER. 2. Release 2 screws to take off HANDLE BASKET. - Screws: DD81-01330A 2 pcs BASKET LOWER...
- Page 27 2-11. BASKET 3 - Basket 3 : DD82-01499A / SVC ASSY-BASKET 3rd (DW6*M6***, except DW6*M604*) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s door, and take off the BASKET 3 from the RAIL BASKET. 2. When you take off the BASKET 3 pull it towards the front and then remove it by lifting it up slightly.
- Page 28 2-12. RAIL BASKET / HOLDER RAIL REAR - Rail Basket : DD81-01379A, DD81-01413A / SVC-RAIL BASKET L, R DD82-01169A, DD82-01170 / SVC ASSY-RAIL BASKET 3RD R, L (DW6*M6***, except DW6*M604*) - Holder Rail Rear : DD81-01378A / SVC-STOPPER RAIL REAR DD81-01674A / SVC-STOPPER RAIL REAR 3RD (DW6*M6***, except DW6*M604*) Part Figure...
- Page 29 2-13. BASKET CUTLERY - Basket Cutlery : DD82-01147A / SVC ASSY-CASE SPOON (DW6*M604***/DW60M5050**/DW60M5070IB/DW6KM5031BB) Part Figure Description [DISASSEMBLY / ASSEMBLY] BASKET CUTLERY 1. This part will be serviced by assembly part only. Disassembly and Reassembly _ 29...
- Page 30 2-14. CAP SOFTENER - Cap Softener: DD81-01678A / SVC-CASE SOFTENER Part Figure Description [DISASSEMBLY] 1. Release the cap of softener by rotating to counter- clockwise. CAP SOFTENER [REASSEMBLY] 1. Reassembly is the reverse order of disassembly. Cap Softener 30 _ Disassembly and Reassembly...
-
Page 31: Checkpoints After Finishing A Service
3. CHECKPOINTS AFTER FINISHING A SERVICE 1. Check the safety device Check the operation of the door lock switch. Make sure that it is locked while the dishwasher is running and that it is unlocked when the dishwasher stops. 2. Use authenticated parts only If any part is not authenticated, replace it with an authenticated part. - Page 32 North & Latin America gspn3.samsungcsportal.com China china.samsungportal.com This Service Manual is a property of Samsung Electronics Co.,Ltd. © 2021 Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable All rights reserved. International and/or domestic law.