Advertisement
3.3
Removing the rear panel
(See Fig.4)
• Prior to performing the following procedure, remove the top
cover and stay bracket.
(1) From the back side of the main body, remove the strain re-
lief from the rear panel in the direction of the arrow.
(2) Remove the thirty screws F attaching the rear panel.
3.4
Removing the component board and tuner unit
(See Figs.5 and 6)
• Prior to performing the following procedure, remove the top
cover and stay bracket.
(1) From the top side of the main body, disconnect the parallel
wire from the connector
Fig.5)
(2) From the back side of the main body, remove the four
screws G attaching the component board. (See Fig.6)
(3) From the top side of the main body, disconnect the card
wire from the connector
(4) From the back side of the main body, remove the two
screws H attaching the tuner unit. (See Fig.6)
All manuals and user guides at all-guides.com
CN511
on the S-video board. (See
CN1
on the tuner unit. (See Fig.5)
F
F
Rear panel
Fig.4
CN511
S-Video board
Tuner
Fig.5
H
Rear panel
Fig.6
Strain relief
F
CN1
Component board
G
(No.MB502)1-7
Advertisement
