Advertisement
3.2
Removing the front panel assembly
(See Figs.2 and 3)
• Prior to performing the following procedure, remove the top
cover.
(1) From the top side of the main body, disconnect the card
wire from the connector
Fig.2)
(2) Disconnect the card wire from the connector
power supply board. (See Fig.2)
(3) Remove the wire protection board fixing the card wire. (See
Fig.2)
(4) Remove the four screws C attaching the front panel as-
sembly. (See Fig.2)
(5) Remove the four screws D attaching the stay bracket. (See
Fig.2)
(6) From the bottom side of the main body, remove the four
screws E attaching the front panel assembly. (See Fig.3)
(7) Remove the front panel assembly in the direction of the ar-
row. (See Fig.3)
1-6 (No.MB502)
All manuals and user guides at all-guides.com
CN402
on the front board. (See
CN201
on the
Front panel assembly
C
C
D
Wire
protection
board
CN402
Front board
D
Stay bracket
Fig.2
E
Fig.3
C
D
CN201
Power supply board
Front panel assembly
E
Advertisement
