Periodic maintenance and adjustment
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
ZAUM1621
1. License plate light bulb socket
2. License plate light unit
3. Screw
2. Remove the license plate light
6
bulb socket (together with the
bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
EAUM3510
Supporting the motorcycle
2
3
1. Maintenance stand (example)
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
6-34
EAU67131
1