Yamaha MT-125 Owner's Manual page 22

Instrument and control functions
The instantaneous fuel consumption
can be set to either "km/L", "L/100 km"
or "MPG" (for the UK).
To switch the instantaneous fuel con-
sumption display between "km/L",
"L/100 km" and "MPG" (for the UK),
push and hold the "SELECT" button.
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
3
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 "MPG" (for the UK): The distance
that can
1.0 Imp.gal of fuel under the cur-
rent riding conditions is shown.
TIP
 If traveling at speeds under 10
km/h (6 mi/h), "_ _._" is displayed.
 The instantaneous fuel consump-
tion function should be used for
general reference only. Do not use
this figure to estimate the distance
that can be traveled on the current
tank of fuel.
Average fuel consumption mode
ZAUM1578
1. Average fuel consumption display
Show the average fuel consumption
since it was last reset.
be traveled
1
The average fuel consumption can be
set to either "AVE_ _._ km/L", "AVE_
_._ L/100 km" or "AVE_ _ _._ MPG" (for
the UK).
To switch the average fuel consump-
tion display between "AVE_ _._ km/L",
"AVE_ _._ L/100 km" or "AVE_ _ _._
MPG" (for the UK), push and hold the
"SELECT" button.
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
 "AVE_ _ _._ MPG" (for the UK):
on
The average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
To reset the average fuel consumption
display, push and hold the "RESET"
button.
TIP

After resetting the average fuel
consumption, "_ _._" will be
shown until the vehicle has trav-
eled 1 km (0.6 mi).
The average fuel consumption
function should be used for gener-
al reference only. Do not use this
figure to estimate the distance that
can be traveled on the current
tank of fuel.
3-8