Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha MT-125 Owner's Manual

Periodic maintenance and adjustment

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24182
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
ZAUM1609
1. Turn signal light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light lens by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
6-33
EAU62590
1
1
6