Table of Contents
Advertisement
OPTI-VOICE
Making connections and setting levels
Setting system controls
1. Set your system controls as follows (see figure above)
1. Page Source Gain control:
2. Page Trigger level:
3. Page Level control:
4. AmPlus™ 100 remote control:
2. Connecting your page sources
1. Use the quick-connect terminal blocks to connect your page sources to the Opti-Voice Page
Option card page inputs, and to connect the line outputs to other peices of equipment in your
system.
3. Setting levels
1. During these system adjustments, have another person continuously speak into the
microphone while you adjust the controls. A music source should also be playing.
For best results, make sure the person who is speaking:
•
Holds the microphone approximately 6 inches (15cm) away from his or her mouth.
•
Speaks at a normal volume.
•
Holds the microphone's push-to-talk switch ON during the adjustments.
Some microphones do not have a push-to-talk switch.
®
PAGE OPTION CARD CONTROLS
14
Set to -20dB
Center
Center
Set to 3 o'clock (about 5dB of attenuation)
Advertisement
Table of Contents
Troubleshooting
