Troubleshooting - Rowenta DZ5080 Manual

DZ5080 US 1103481042
20 • Troubleshooting
Issues
Iron does not heat.
Thermostat control
light* or the yellow
LED* goes on and off.
Not enough steam.
Iron is emitting a brown
or white substance.
* depending on model
18/04/06 15:21
Possible causes
The temperature control
is set too low.
Not properly plugged in.
Auto-off has engaged*.
This is normal.
There is insufficient water
in the tank.
Iron is not set to a steam
setting.
The Anti-Drip function is
active *.
Water may need to be
changed due to hardness
or organic matter.
Garment has not been
rinsed sufficiently.
11
Page 11
Solutions
Set the temperature
control to a higher
temperature.
Check that iron is plugged
in correctly.
Move iron or shake it
gently to reactivate.
When the Thermostat
control light* or the yellow
LED* gooes on and off the
iron is heating up. As soon
as the Thermostat control
light* goes off or the green
LED* lights up the set
temperature has been
reached.
Fill the water tank.
See section called
"Steam Ironing".
Wait for the soleplate to
reach correct temperature.
See section "Water
Recommendations".
Switch to spring water or
mix tap water with spring
water.
Ensure garment is rinsed
thoroughly to remove any
detergent deposits or
chemicals on new
garments.