Splitting The Keyboard Between - Casio CELVIANO GP-400 User Manual

Playing with Different Tones
Splitting the Keyboard
between Two Different Tones
You can use the procedure below to assign different
tones to the right range and left range of the keyboard,
so it sounds like you are playing an ensemble between
two instruments.
Split point
Acoustic Bass
F # 3
• If you turn on both layer and split, layering will be
applied to the right side range of the keyboard only.
• Use of the Duet Mode (page EN-17) is recommended
to divide the keyboard in the center between a left
keyboard and right keyboard of identical ranges.
1.
Press the LAYER button.
2.
Use the u and i buttons to display
"SPLIT".
• To use both keyboard split and keyboard layering,
display "LAYER&SPLIT".
3.
Select a tone for the left keyboard.
• Use the q and w arrow buttons to select "L"
(Lower) and then press the ENTER button.
L
4.
Select a tone and then press the ENTER
button.
• See "Selecting and Playing a Tone" on page EN-10 for
information about how to select a tone.
EN-20
BERLIN GRAND
5.
Select the tone for the right side range.
• Use the q and w arrow buttons to select "U1" and
then press the ENTER button.
6.
Select a tone and then press the ENTER
button.
• If you want to use layering for the right keyboard
(page EN-18), repeat steps 5 and 6 to select the "U2"
(Upper 2) tone.
7.
Press a keyboard key.
• This will sound the tones assigned to the left and
right side ranges of the keyboard.
8.
To cancel the split keyboard and switch to a
single tone (Upper 1), press the LAYER
button or EXIT button.
• Each press of the LAYER button toggles between
unlayered (one tone) and layered (two tones).