Table of Contents
Advertisement
Before setting this option,
select a suitable washing
programme for the
garments. The appliance
will performs the most
fitting spin cycle for your
garments care (e.g. For
synthetics items, first
select the Synthetica/
Synthétiques washing
programme and then the
Centrifugeren/Essorage
option).
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator
spin speed.
8.5 Vlekken/Voorwas /
Taches/Prélavage
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Vlekken/Taches
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate phase
of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
• Voorwas/Prélavage
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
and the
. The stain remover
These two options cannot be
set together.
8.6 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero
, the indicator
steady on and the indicator
flashing, and the Start/Pauze / Départ/
Pause led remains lit. The drum performs
smooth movements for about 30 minutes
to keep the steam benefit. By touching
any button the anti-crease movements
stop and the door unlocks, the appliance
proposes again the previous set
programme.
To interrupt the anti-crease phase, you
can also:
• Press the Aan/Uit / Marche/Arrêt
button for a few seconds to activate or
the deactivate the appliance.
• Turning the programme dial in
another position.
A small laundry load helps to
reach better results.
8.7 Startuitstel/Départ Différé
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauze / Départ/
Pause button, the display shows the
indicator
and the selected delay time
and the appliance begins the countdown.
ENGLISH
17
is
starts
Advertisement
Table of Contents
