Canon PIXMA MG5220 Network Installation Manual
Canon printer user manual
Hide thumbs
Also See for PIXMA MG5220:
- Service manual (67 pages) ,
- Getting started (54 pages) ,
- Network setup manual (34 pages)
Related Manuals for Canon PIXMA MG5220
Summary of Contents for Canon PIXMA MG5220
- Page 1 Next >> << Previous Installing Your Multifunction to Your Network for the First Time PIXMA MG5220 Mac OS...
- Page 2 Installing Your Multifunction to Your Network for the First Time Preparing to Connect My Multifunction To My Network Connecting Your MG5220 To Your Network Installing The MG5220 Software PIXMA MG5220 Mac OS << Previous Next >>...
-
Page 3: Network Requirements
Preparing to Connect My Multifunction To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. <<... - Page 4 Preparing to Connect My Multifunction To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Notes on Network Connection •...
-
Page 5: Connecting To Network
Connecting Your MG5220 To Your Network Step 1 Use the ↑ or ↓ button (A) to display Setup, then press the right FUNCTION button (B). << Previous Step 2 Use the ← or → button (C) to select Wireless LAN setup, then press the OK button. - Page 6 Connecting Your MG5220 To Your Network Step 3 Select Yes, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp lights blue. << Previous Step 4 Select Easy setup, then press the OK button. Next >>...
- Page 7 Connecting Your MG5220 To Your Network Step 5 Select the access point name you wrote down, then press the OK button. Note: • Nearby access points may be detected. • Access point names with 2-byte characters are not displayed properly, however, they can be selected. <<...
- Page 8 Connecting Your MG5220 To Your Network Step 7 Enter the network key you wrote down on, then press the left FUNCTION button (E). << Previous 1. Press the center FUNCTION button (F) to switch character entry modes. 2. Enter upper and lower case letters of the alphabet correctly.
- Page 9 Connecting Your MG5220 To Your Network Step 7 (continued) Character Entry This machine allows you to enter characters when an on-screen keyboard is displayed. Follow the procedure below. Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers, and symbols. Each time you press the center FUNCTION button, the on-screen keyboard is switched among them.
- Page 10 Connecting Your MG5220 To Your Network Step 7 (continued) Character Entry • To insert a space, select Space on the on-screen keyboard and press the OK button. • To insert characters, select the section (C) of the screen using the ↑ or ↓ button, move the cursor to the character on the right of the target position using the ←...
- Page 11 Connecting Your MG5220 To Your Network Step 8 Make sure that the network key is correct, then press the OK button. Your MG5220 is now connected to your network Note: • If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again.
-
Page 12: Installing Software
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access. - Page 13 Installing The MG5220 Software Step 1 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. Note: If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.
- Page 14 Installing The MG5220 Software Step 3 Click Easy Install The drivers, application software, and on-screen manuals are installed. Note: If you want to select particular items to install, click Custom Install. << Previous Step 4 Click Install Next >>...
- Page 15 Installing The MG5220 Software Step 5 Select Use the printer on network, then click Next. << Previous Step 6 When the Printer Detection screen appears, click Next. IMPORTANT IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY SELECTED IN 5.
-
Page 16: Register Printer
Installing The MG5220 Software Step 7 On the Canon IJ Network Tool screen, select MG5200 series in Printers, then click Next. Note: The alphanumeric characters after Canon MG5200 series is the machine's Bonjour service name or MAC address. If the machine is not detected, refer to the printed manual: Network Setup Troubleshooting. - Page 17 Installing The MG5220 Software Step 9 For OS X v. 10.6.x and 10.5.x only Select Canon MG5200 series canonijnetwork and click Add. Go to Step 11. Note: It may take a minute or two before the printer appears in the list <<...
- Page 18 Step 10 (continued) 2. Click More Printers in the Printer Browser window. << Previous Step 10 (continued) 3. Click More Printers in the Printer Browser window. 4. Make sure that Canon MG5200 series is added to the list of printers. Next >>...
- Page 19 Installing The MG5220 Software Step 11 When the Register Printer and Scanner screen appears, click Register Scanner. << Previous Step 12 Select MG5200 series on the Scan- from-Operation-Panel Settings screen, then click OK. Next >>...
- Page 20 Installing The MG5220 Software Step 13 Click Next on the Register Printer and Scanner screen. Wireless setup is now complete << Previous Step 14 Follow any on-screen instructions to proceed with the remaining software installation. Next >>...