Programme Info; Miele@Home - Miele TWJ 660 WP Operating Instructions Manual

Settings

Programme info

Programme names and load quantities
that light up in the display when the
programme is selected with the
programme selector can be switched
off.
Options
- (Programme name and load size
Off
are not displayed)
-
Programme name
displayed)
-
Prog. & max load
factory setting)

Miele@home

Control the networking of your dryer
with your home Wi-Fi network.
The following points may appear in the
submenu:
–
Set up
This message only appears if the dryer
has not yet been connected to a Wi-Fi
network.
Please refer to "Before using for the first
time" for instructions on how to set up
the connection.
- Deactivate (visible if Miele@home is
activated)
Miele@home remains set up, the Wi-Fi
function is switched off.
- Activate (visible if Miele@home is
deactivated)
The Wi-Fi function is reactivated.
90
(The load size is not
(Both are displayed,
- Connection status
Miele@home is activated)
The following values are displayed:
- The quality of the Wi-Fi reception
- The network name
- The IP address
- Set up again (visible if set up)
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
- Reset (visible if set up)
- The Wi-Fi is switched off.
- The Wi-Fi connection will be reset to
the factory setting.
The network configuration should be
reset whenever the dryer is being
disposed of or sold, or if a used dryer is
being put into operation. This is the only
way to ensure that all personal data has
been removed and the previous owner
will no longer be able to access the
appliance.
A new connection setup has to be
carried out in order to use the
Miele@home setting again.
(visible if