Wash2Dry; Requirements For Use - Miele TWJ 660 WP Operating Instructions Manual

Before using for the first time

Wash2Dry

Once the programme has come to a
proper end, the Miele washing
machine transfers the programme
data via the router to which the
networked tumble dryer is also
connected, as well as transferring it to
the Miele Cloud.
The tumble dryer automatically sets a
drying programme tailored to the
laundry based on the transferred
programme data.
All you need to do is start the drying
programme once you have loaded the
tumble dryer. No further programme
settings are required on the tumble
dryer.
Useful tip: The drying programme must
be started within 24 hours of the end of
the wash programme. The data will be
kept available for the tumble dryer
during this period, but will be
overwritten when a new wash
programme ends.
Useful tip: Do not disconnect the
tumble dryer from the network. The
programme data transferred by the
washing machine will be received by
the tumble dryer as soon as you select
Wash2Dry.
If you have disconnected the appliance
from the network beforehand, this will
cause a delay in receiving the data.
22

Requirements for use

In order to use the Wash2Dry function,
the Miele washing machine and
tumble dryer must be networked using
Miele@home services.
Useful tip: Set up Miele@home as
described in "Before using for the first
time - Miele@home".
Useful tip: To locate the Wash2Dry
function, turn the programme selector
to Further programmes.