Russell Hobbs RHFM2363 User Manual page 29

PROBLEM SOLVING
Problem Potential reason Potential solution
Spillages or splashes can burn and catch fire, all food that is
put into the microwave should be appropriately covered. All
spillages or splashes must be cleaned, and all areas of
microwave cleaned after each use.
1. Burnt on food Burnt on food debris in the microwave can cause the
debris microwave to 'spark'. This is because burnt on debris can be
focused on by the microwaves and spark.
Microwaves must be thoroughly cleaned after every use to
ensure no food is burnt on to any part of the microwave.
Sparking
No metal or foil should be put inside a microwave as it can
cause 'sparking' which can damage the microwave.
2. Metal or foil
The only metal accessories that should be used inside the
microwave are the ones supplied by the manufacturer.
Food with none porous skins (potatoes for example), must
3. Pressure build up in
be pierced to allow steam to escape. As the build up of
food
pressure can cause food to burst and create a 'fire hazard'.
Microwaves cannot be run empty, microwaves need
moisture to operate correctly.
If microwaves are operated empty or are used to heat up
plates (this is not permitted), the microwaves can focus on a
Operated empty or
Heat spots single point inside the microwave. This can cause a heat
with no moisture
spot, which can cause the area to become deformed,
warped or start to melt.
If microwaves are operated empty or to heat up foreign
objects this will void the warranty.
29