Table of Contents
Advertisement
HOW TO USE THE MICROWAVE
2. Once you have selected the appropriate setting, press the 'Start' button to
confirm.
3. Press the '+' and '-' buttons to choose the food weight, these are pre-set
and listed in the above table.
4. Press the 'Start' button to commence cooking.
Make sure you monitor cooking progress as times can vary. Allow the food to
stand in the microwave for 1-2 minutes after the cooking cycle is complete.
Multi-sequence cooking function
For some recipes, results may be better if you wish to cook on different
power levels for different times, for one dish.
Note:
This can be used to set a maximum of two different stages. The auto
menu cannot be set as one of the multi-stage cooking functions.
For example, if you wanted to
microwave power for 7 minutes - the steps are as follows:
1. Press the 'Weight Defrost' button once – the screen will display 'dEF1'
2. Press the '+' and '-' buttons to adjust the defrost weight to 500g.
3. Press the 'Power' button once.
4. Press the '+' and '-' buttons to choose 80% microwave power until the
display shows 'P80'.
5. Press the 'Start/+30Sec/Confirm' button to confirm.
6. Press the '+' and '-' buttons to adjust the cooking time to 7 minutes.
7. Press the 'Start/+30Sec/Confirm' button to start the cooking process.
defrost 500g of food, then cook it at 80%
22
Advertisement
Table of Contents
