Jensen VX7014 Operating Instructions Manual page 64

Making an Outgoing Call
Outgoing calls can be performed in two manners. The outgoing call can be direct
dialed using the front panel keypad or the by touching either the Phonebook or
Call History icons, selecting a name and touching the phone number.
Direct Dialing:
1. Press the front panel MENU button and then touch the BLUETOOTH icon to
access the Bluetooth® main menu. The following screen will appear:
2. Use the 0-9, */+, and # icons to input the phone number. If necessary touch the
green arrow icon to clear the last digit or the entire number and start over.
3. After entering the phone number, touch the
number dialed will be displayed on the screen.
4. To end the call, touch the
Answering an Incoming Call
To answer an incoming call touch the
clearly into the units microphone. To end the conversation, touch the
Rejecting an Incoming Call
Touch the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.
Volume Control
To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the VOL+/ VOL- icons on the remote control.
64
Bluetooth Direct Dial Screen
icon.
icon. For best reception, speak loudly and
VX7014
icon to dial the call. The
icon.