Jensen VX7014 Operating Instructions Manual page 24

Beep
Wallpaper - Touch Engine Start, Blue Haze, Green Cubes, Red Swirl or Tribal to
Calibration- The Touch Screen Calibration adjustment is used to set the
parameters of the touch screen to ensure that when the screen is touched, it
corresponds to the feature desired.
Note: Never use a pen or sharp object to calibrate the touch screen as this will
damage the panel.
1.
2. Follow the instructions on the screen touching and momentarily holding
3. The second screen will appear:
4. If the screen is touched, the new calibration parameters will be accepted. If
the screen is not touched within thirty seconds, the new parameters will be
disregarded.
24
Calibration Screen
VX7014