Tenda D301-V2 User Manual page 8

Blinking
Off
Back Panel
Button & Interface
DSL
1
2/3
4
USB
WPS/RST
PWR
ON/OFF
_________________________________________________________________________________________________
Note:
Please use the included power adapter. Use of a power adapter with different voltage rating may damage the device.
_________________________________________________________________________________________________
Follow the diagram below to install the device.
via the Internet.
The current Internet client is connecting to the Internet and data is transmitted via
the Internet.
The current Internet client is not connecting to the Internet.
Description
RJ11 port, for connecting the router to the Internet via a telephone line provided by your ISP.
LAN port or WAN port. When you access the Internet via the DSL, this port works as a LAN
port which can be used to connect to a PC, switch, or a router; when you access the Internet
via an Ethernet cable from your ISP directly, this port works as a WAN port.
Note: It works as a LAN port by default.
LAN port, used to cable the device to the local network devices such as computers.
LAN port or IPTV port. When IPTV feature is disabled, it works as a LAN port which can be
used to connect to a PC, switch or a router; when IPTV feature is enabled, it works as a IPTV
port, and it can only be connected to a Set-Top Box.
Note: IPTV feature is disabled by default.
Used to connect a USB device, such as a 3G USB modem, USB print server or storage
service.
Press it for 1-3 seconds to enable WPS-PBC feature;
Press it for 10 seconds to restore all configurations to factory defaults.
Used to connect to the power adapter, which is included in the package.
Power switch to turn the router on or off.
4
Wireless Modem Router