Table of Contents
Advertisement
3. Select
Start scan
■
DVB-C
1. Enter the frequency with numeric buttons
Normally set
Symbol Rate
●
2. Select
Start scan
■
DVB-T
1. Select a channel with
channel
Set where the level of
●
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
Set
Sound System
●
Normally set
Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
with
/
and press
and
Service ID
with
/
and press
/
and adjust frequency with
Signal Quality
Auto
and
Colour
System, and then perform this function.
to Auto.
/
and press
OK
to make small adjustments to the tuning of an individual
- 70 -
OK
to search
to Auto.
OK
to search
/
becomes the maximum.
Setup.
to set
for each
Advertisement
Table of Contents
