Table of Contents
Advertisement
Selects whether to switch to the 3D mode automatically or not.
On
(Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On
/ Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when
3D Detection
●
For DVB, Component, HDMI and DisplayPort input
●
3D Refresh Rate
(Auto
/
100Hz
/ 120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
2D 3D Depth
(Max
/
Mid
/ Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On
/ Off)
Adjustment of the 3D effect (except in
Set to
On
to enable
When setting to On, a safety precaution message will appear. Read it
●
carefully and press
When adjusting, take into account that the vision of 3D images varies
●
is set to
2D 3D
Effect
setting.
BACK/RETURN
to go to
- 189 -
On (Advance)
mode).
Effect
setting.
On
Advertisement
Table of Contents
