■
Insert the CI module (optional)
The features that appear on screen are dependent on the contents of the
●
selected CI module.
Normally encrypted channels will appear. Follow the on-screen
●
instructions. If encrypted channels do not appear, take the following steps.
For more details, read the manual of the CI module, or check with the
●
broadcaster.
1. Display the
TV Selection
2. Select the mode with
DVB-C
/
DVB-T
3. Display the menu with
4. Select
Setup
Common Interface
5. Select
Slot 1:
/
Slot 2:
instructions
On-screen instructions may not correspond to the remote control buttons.
●
You can also select the CI module to watch the encrypted channels from
●
CAM Selection
in
Watching
= Note =
To tune in the encrypted channels properly, ensure the appropriate CI
●
module is inserted and selected.
To use this function fully (watching, recording, etc.), insert the same CI
●
module for each slot.
screen with
TV
/
and press
MENU
with
with
/
, press
Option
Menu.
Basic
Option Menu
- 170 -
OK
to set
/
and press
OK
OK
and follow the on-screen
to access