Table of Contents
Advertisement
Set-up menu
Set Up
Auto Start Up
Language
English
Country
Off
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
Back:
Select:
Enter:
Exit:
MENU
Auto Start-up
Starts the "first time operation menu" to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 5, 6). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house,
or to search for new channels that have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
Country
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
"Off" instead of a country/region.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5, 6). However, this option allows you to
repeat the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
F
f
1
Press
/
to select the channel you want to move to a new position,
then press
.
F
f
2
Press
/
to select the new position for your channel, then press
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
F
f
1
Press
/
to select the desired input source, then press
F
f
2
Press
/
to select the desired option below, then press
• "Equipment labels": Uses one of the preset labels to assign a name to connected
equipment.
• "Edit": Creates your own label.
• "Skip": Skips an input source that is not connected to any equipment when you
press F/f to select the input source.
Sound Offset
Sets an independent volume level to each equipment connected to the TV.
All manuals and user guides at all-guides.com
You can select the options listed below on the
Set-up menu. To select options in "Settings", see
"Navigating through menus" (page 19).
.
.
.
Digital Set-up menu
Set Up
Auto Start Up
Language
English
Country
Off
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
Back:
Select:
Exit:
Enter:
MENU
Digital Tuning
Displays the "Digital Tuning" menu.
Digital Auto Tuning
Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of
the digital channels stored on the TV.
F
f
1
Press
/
to select the channel you want to remove or move to a new
position.
If you know the programme number (frequency)
Press the number buttons to enter the three-digit programme number of the broadcast
you want.
2
Remove or change the order of the digital channels as follows:
To remove the digital channel
Press
. A message that confirms whether the selected digital channel is to be
G
deleted appears. Press
To change the order of the digital channels
g
F
f
Press
, then press
/
Repeat the procedure in steps 1 and 2 to move other channels if required.
3
Press RETURN.
Digital Manual Tuning
Tunes the digital channels manually.
1
Press the number button to select the channel number you want to
manually tune, then press
2
When the available channels are found, press
you want to store, then press
F
f
3
Press
/
to select the programme number where you want to store the
new channel, then press
Repeat the procedure above to tune other channels manually.
You can change/set the digital settings using the
Digital Set-up menu. To select options in
"Settings", see "Navigating through menus"
(page 19).
to select "Yes", then press
.
G
to select the new position for the channel and press
.
F
f
/
to tune the channel.
F
f
/
to select the channel
.
.
Advertisement
Table of Contents
