Toshiba MMD-VNK502HEX1E Installation Manual page 84

Indoor unit Indoor unit
Model name Model name
Check the addresses of the indoor units. (For details, see "Advanced control" in this manual.)
(Code: [12] for the system, [13] for indoor units, and [14] for groups)
Line Indoor Group Line
Settings Settings
Did you change the setting for changing the ventilation FAN speed?
If you did not, put a tick against "No change". If you did, put a tick against the item you selected.
(For details, see "Advanced control" in this manual.)
Changing the ventilation FAN Changing the ventilation FAN
speed speed
(Code: [EB]) (Code: [EB])
 No change  No change
 High [0002]  High
 Low [0003]  Low
 Imbalance [0004]  Imbalance
* "High" may be "Extra High". * "High" may be "Extra High".
Compatible with RBC-AMT32E Compatible with RBC-AMT32E
Did you change the setting for changing the operation output?
If you did not, put a tick against "No change". If you did, put a tick against the item you selected.
(For details, see "Advanced control" in this manual.)
Changing the operation output Changing the operation output
(Code: [ED]) (Code: [ED])
 No change  No change
 ON during [0000]  ON during
normal normal
operation operation
 ON during [0001]  ON during
normal normal
operation operation
or the or the
nighttime nighttime
heat purge heat purge
operation operation
 ON during [0002]  ON during
the the
nighttime nighttime
heat purge heat purge
operation operation
 ON when [0003]  ON when
the SA fan the SA fan
is running is running
 ON when [0004]  ON when
the EA fan the EA fan
is running is running
Did you change the setting for changing the abnormal signal / bypass ventilation signal output?
If you did not, put a tick against "No change". If you did, put a tick against the item you selected.
(For details, see "Advanced control" in this manual.)
Changing the abnormal signal / Changing the abnormal signal /
bypass ventilation signal output bypass ventilation signal output
(Code: [EE]) (Code: [EE])
 No change  No change
 ON when an [0000]  ON when an
abnormal abnormal
signal is signal is
detected detected
 ON when [0001]  ON when
the bypass the bypass
ventilation ventilation
signal is signal is
detected detected
165-EN
Indoor unit
Model name
Indoor Group Line Indoor Group Line
Settings
Changing the ventilation FAN Changing the ventilation FAN
speed speed
(Code: [EB]) (Code: [EB])
 No change  No change
[0002]  High [0002]  High
[0003]  Low [0003]  Low
[0004]  Imbalance [0004]  Imbalance
* "High" may be "Extra High". * "High" may be "Extra High".
Compatible with RBC-AMT32E Compatible with RBC-AMT32E
Changing the operation output Changing the operation output
(Code: [ED]) (Code: [ED])
 No change  No change
[0000]  ON during [0000]  ON during
normal normal
operation operation
[0001]  ON during [0001]  ON during
normal normal
operation operation
or the or the
nighttime nighttime
heat purge heat purge
operation operation
[0002]  ON during [0002]  ON during
the the
nighttime nighttime
heat purge heat purge
operation operation
[0003]  ON when [0003]  ON when
the SA fan the SA fan
is running is running
[0004]  ON when [0004]  ON when
the EA fan the EA fan
is running is running
Changing the abnormal signal / Changing the abnormal signal /
bypass ventilation signal output bypass ventilation signal output
(Code: [EE]) (Code: [EE])
 No change  No change
[0000]  ON when an [0000]  ON when an
abnormal abnormal
signal is signal is
detected detected
[0001]  ON when [0001]  ON when
the bypass the bypass
ventilation ventilation
signal is signal is
detected detected
– 83 –
Indoor unit
Model name
Indoor Group
Settings
[0002]
[0003]
[0004]
[0000]
[0001]
[0002]
[0003]
[0004]
[0000]
[0001]
166-EN