Table of Contents
Advertisement
CONNECT THE MICROINVERTER
Connect the Q Cable to the microin-
verter. Listen for a click as the con-
nectors engage. (See Figure 6)
Cover any unused connectors with
Enphase Sealing Caps. Listen for a
click as the connectors engage.
You must lift the microinverter in
order to connect it. A protective
shield prevents connection.
CREATE AN INSTALLATION
MAP
The Installation Map is a diagram of
the physical location of each Mod-
ule in your PV installation.
Copy or use the blank map (See
Figure 8 and 9) to record the Mod-
ule placement for the system, or
provide your own layout if you re-
quire a larger or more intricate in-
stallation map.
Backside of
Figure 6. Connect the Q Cable to the microinverter
Each PV Module and Enphase IQ
Envoy has a removable serial num-
ber label. Build the installation map
by peeling the serial number labels
from the Modules and placing the
labels on the map. See Figure 7.
After you have created the installa-
tion map, use the Enphase Installer
Toolkit mobile app to record the
serial numbers and configure the
system.
For Installer Toolkit details, refer to
"Detecting Microinverters" in the
help topics of the Installer Toolkit
app.
(150) or (215)
module
Q cable
A protective shield
ACM label
Figure 7. ACM label on the module frame
9
Peel the removable serial number
label from each Module frame and
affix it to the respective location on
the installation map paper.
Always keep a copy of the installa-
tion map for your records.
Side of module
Advertisement
Table of Contents
