LG M3204C Owner's Manual page 31

Selecting the options
OPTION
▲
ISM Method : Normal
DPM Select : On
DPM Select : On
Power Indicator : ON
Logo Light : ON
Interface Select : RS232C
Network Setup
Information
Factory Reset
DPM Select
A user can choose to turn the power saving mode on / off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off. If you set Off, i will
go Off. If you set On at any time, the power indicator will automatically be turned on.
Logo Light
Use this function to reset the Logo Display Lamp On the front side of the product to On or Off. If you
set On, the lamp will automatically be turned on.
Interface Select
Sets up network connections.
- Network : LAN - Enables communication via Ethernet.
- RS-232C : Enables communication via Serial.
Network Setup
- DHCP : Allocates and sets up IP automatically.
- Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
*If Interface select is set to RS232C.DHCP and Manual are disabled.
Information
You can find informations about Serial No, F/W version, IP Address and MAC Address.
Factory Reset
Select this option to return to the default factory settings.
User Menus
Move OK
ꔋ
31