Connecting to External Devices
Video Input
Connect the video cable as shown in the below figure and then connect the
1
power cord. (See page 10).
When connecting with a BNC cable.
• Connect the input terminal with a proper color match.
BNC Cable
(not included)
Select an input signal.
2
Press the INPUT button on the remote control to select the input signal.
INPUT → ◄ ► → OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
When connecting with an BNC cable.
• Select AV.
Input List
AV
Component
Product
Audio Cable
(not included)
VCR/DVD Receiver
RGB
HDMI/DVI
SuperSign
15