Connecting to External Devices
Component Input (480i/480p/576i/576p/720p/1080i)
Connect the video/audio cable as shown in the below figure and then, connect the power
1
cord (See page 10).
• Connect the input terminal with a proper color match.
BNC Cable
(not included)
HDTV Receiver
Note
- Some devices may require HDCP in order to display HD signals.
- Component doesn't support HDCP.
Select an input signal.
2
Press the INPUT button on the remote control to select the input signal.
INPUT → ◄ ► → OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
• Select Component.
Input List
AV
Component
Product
Audio Cable
(not included)
RGB
HDMI/DVI
16
SuperSign