Quick Reference; Remote Maintenance - Battery Replacement; Way Remote Button Functions - Firstech 2WQ9R-FM User Manual

Quick Reference

Remote Maintenance – Battery Replacement
The only regular maintenance this system requires is remote control battery replacement. No
programming is required when replacing the battery.
Turn the remote over and unlock the battery cover by sliding the black button push. Slide the battery
cover off, revealing the AAA battery.
IMPORTANT: Be sure to observe correct polarity when installing the battery.

2 Way Remote Button Functions

Button Duration
Short(0.5 sec) Locks doors and if equipped, arms the alarm.
Double Unlocks doors and if equipped, disarms the alarm.
Holding this button will start your vehicle. Repeat and this will
Long(2.5 sec)
shut your vehicle down.
Car Check (updates vehicle status on remote pager) / Secure
Short(0.5 sec) Auxiliary / Temperature Display / Vehicle Voltage Display /
Remote Voltage Display
Accesses Remote Menu (Passive arming, Alert mode, etc)
Double
See Remote Menu Table for details.
Short(0.5 sec) Locks doors and if equipped, arms the alarm.
Used as Auxiliary 1 and Sliding door right, Defrost function
according to the setting of AUX 1 Config in the remote menu.
Double
Not available when set to OFF in AUX 1 Config of the remote
menu.
Panic/vehicle locater (flashes vehicle's parking lights and
Long(2.5 sec)
sounds siren and horn).
Short(0.5 sec) Unlocks doors and if equipped, disarms the alarm.
Used as Auxiliary 2 and Sliding door left, Head lights function
according to the setting of AUX 2 Config in the remote menu.
Double
Not available when set to OFF in AUX 2 Config of the remote
menu.
Run time extender. Resets the run time for Turbo Timer or
Long(2.5 sec)
Remote Start.
Short(0.5 sec) LCD View
Trunk release. Triggers the trunk release output and opens
Long(2.5 sec)
the vehicle's trunk.
Long(2.5 sec) Option programming menu 1. For use during installation.
Long(2.5 sec) Option programming menu 2. For use during installation.
Description