Quick Reference - Firstech 2WT13R-SF User Manual

Quick Reference

Remote Maintenance – Battery Charging
The 2WT13R-SF comes with a rechargeable battery. Use the included power adapter and micro
USB cable to charge your remote.
First, locate the micro USB port on the top of your remote. Connect your micro USB cable to your
computer or USB power adapter. The LCD on the front of the remote will showing that your remote
is charging. This should take approximately 2 hours.
2 Way Remote Button Functions
Button
+
+
Duration
half second Locks doors and if equipped, arms the alarm.
Used as Auxiliary 2 and Sliding door left, Head lights
function according to the setting of AUX 2 Config in the
Double Tap remote menu.
Not available when set to OFF in AUX 2 Config of the
remote menu.
Long Hold Panic/vehicle locater (flashes vehicle's parking lights
(2.5 sec) and sounds siren and horn).
LCD View / Car Check (updates vehicle status on
Short
remote pager) / Secure Auxiliary / Temperature Display /
(0.5 sec)
Vehicle Voltage Display
Accesses Remote Menu (LCD View, Passive arming,
Alert mode, etc) See Remote Menu Table for details.
Double
Run time extender. Resets the run time for Turbo Timer
or Remote Start.
Long Hold Holding this button will start your vehicle. Repeat and
(2.5 sec) this will shut your vehicle down.
Short(0.5 sec) Unlocks doors and if equipped, disarms the alarm.
Used as Auxiliary 1 and Sliding door right, Defrost
function according to the setting of AUX 1 Config in the
Double remote menu.
Not available when set to OFF in AUX 1 Config of the
remote menu.
Long Hold Trunk release. Triggers the trunk release output and
(2.5 sec) opens the vehicle's trunk.
Long Hold
Option programming menu 1. For use during installation.
(2.5 sec)
Long Hold
Option programming menu 2. For use during installation.
(2.5 sec)
Description