Using The Computer - LG W2452T User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to
A
Connect DVI Cable
B
Connect Dsub Cable (PC)
C
Connect Dsub Cable (Mac)
Power Cord
2.
Insert the Cable Deco Cover in the Stand Body in the correct direction.
3.
Press button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
2 .
Signal Cable
Analog signal
Digital signal
D-sub
DVI
Wall-outlet type
PC-outlet type
DVI-D(This feature is not available in all countries.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
A6
Fix the power cord & signal cable
as shown in the picture.
NOTE
This is a simplified
representation of the rear view.
This rear view represents a
general model; your display
may differ from the view as
shown.
User must use shielded signal
interface cables (D-sub 15 pin
cable, DVI cable) with ferrite
cores to maintain standard
compliance for the product.