Field Wiring Connection Points - Rheem Raypak C-5 Latching Lockout Module Installation And Operating Instructions Manual

6. FIELD WIRING CONNECTION POINTS

NOTE: Tighten terminal strip clamping screws to 4 in-lbs. Breakage from over-torquing is not covered under warranty.
Use 18 AWG stranded copper conductors only.
For supply connections, use 18AWG stranded or larger wires rated at min. 75°C (167°F).
C-5 BOARD
24VAC AVAILABLE
FOR REMOTE LAMP
APPROVED
UNCONTROLLED DOCUMENT IF PRINTED
}
DRY CONTACTS AVAILABLE FOR REMOTE
FAULT INDICATION
FROM: IGNITION MODULE
TO: IGNITION MODULE
7