Table of Contents
Advertisement
EVOLVE Portable Column Loudspeaker
Notice!
If connected with a mobile device, notification alerts and ring tones will also be played
i
through the system.
Disable these notifications or enable Airplane mode on your mobile device to prevent
unwanted interruptions during audio playback.
LED Menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF, or LIMIT.
–
–
–
DISPLAY Menu
The Display menu options are BACK, LCD DIM, BRIGHT, and CONTRAST.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for 30 seconds.
Available options for this selection are: ON or OFF.
The default is ON.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD.
The range is 1 to 10.
The default is five (5).
CONTRAST Menu
The Contrast menu is used to increase or decrease the visibility of the LCD screen.
The range is 1 to 10.
The default is five.
STORE Menu
The Store menu allows you create up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
Notice!
i
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 11 characters.
Storing customized user settings
To store customized user settings, do the following:
1.
2.
3.
4.
5.
Electro-Voice
ON - turns the LED on when the power to the loudspeaker is ON. (Default)
OFF - turns the LED off.
LIMIT - turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
From the DSP menu, scroll to STORE.
Push the MASTER VOL knob to select STORE.
The store screen appears.
Push the MASTER VOL knob to select 1.
The Enter name for 1 screen appears.
Use the MASTER VOL knob to scroll through the characters.
The characters appear.
Push the MASTER VOL knob to select the desired character.
User manual
Amplifier DSP | en
27
2020-12 | v01 | F.01U.393.750
Advertisement
Table of Contents
