Table of Contents
Advertisement
EVOLVE Portable Column Loudspeaker
SUB DELAY Menu
The SUB DELAY menu is used to acoustically align subwoofer and column speaker if used with
an Electro-Voice authorized mounting bracket. The delay can be set in meters. The range is
from -10 m to +10 m, default setting is OFF. Positive values are used if the subwoofer is
located closer to the audience (in front of the column), negative values are used if the
subwoofer is further away from the audience (behind the column).
Notice!
i
Do not change this value if subwoofer and column are connected with the connector pole.
This may cause unwanted acoustic changes to the system sound.
SUB LEVEL Menu
The Sub Level menu allows independent gain control of the subwoofer output. Changes to
this parameter effectively change the crossover of the EVOLVE system. The default setting of 0
dB is recommended for best audio performance.
The range is MUTE, -80 dB to +10 dB.
The default is 0 dB.
TREBLE Menu
The Treble menu is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference.
The range is -12 dB to +6 dB for Main system EQ. The range is -12 db to +12 db for INPUTS
1-7/8 in mixer mode.
The default is 0 dB.
MID Menu
The MID menu is used to set the gain of the MID peak filter.
The range is -12 dB to +6 dB for Main system EQ. The range is -12 dB to +12 dB for INPUTS
1-7/8 in mixer mode.
The default is 0 dB.
BASS Menu
The Bass menu item is used to configure the low frequencies of sound.
The range is -12 dB to +6 dB for Main system EQ. The range is -12 dB to +12 dB for INPUTS
1-7/8 in mixer mode.
The default is 0 dB.
MAIN GEQ Menu (Mixer mode)
The MAIN EQ menu is used to adjust the frequency response of the loudspeaker for different
applications or personal preference. There are 7 different EQ filters available centered at the
following frequencies: 63, 160, 400, 1.0K, 2.5K, 6.0K & 12K Hz. The filter is also independent
of the MAIN GEQ setting if AUX OUT is set to MAIN MIX.
The range of each filter is -12 dB to +12 dB.
The default value for each filter is 0 dB.
AUX GEQ Menu (Mixer mode)
The AUX GEQ menu is used to adjust the frequency response of the AUX OUT for different
applications or personal preference. There are 7 different EQ filters available centered at the
following frequencies: 63, 160, 400, 1.0K, 2.5K, 6.0K & 12K Hz.
The range of each filter is -12 dB to +12 dB.
The default value for each filter is 0 dB.
Electro-Voice
User manual
Amplifier DSP | en
25
2020-12 | v01 | F.01U.393.750
Advertisement
Table of Contents
