Confirming Tcp/Ip Settings (Ipv6) - Canon IMAGE RUNNER 5050 Network Manual

Confirming TCP/IP Settings (IPv6)

The following is the procedure for confirming that the TCP/IPv6 network
connections are properly set.
3
1
2
3-26
Protocol Settings
[On] for <Register Stateful Address>: You can automatically register a stateful
address in the DNS server using dynamic DNS updating.
IMPORTANT
Windows 2000 Server and Windows Server 2003 do not support DHCPv6 servers.
On the TCP/IP Settings screen, press [IPv6 Settings] ➞ [PING
Command].
In [PING Command], check the following.
Pressing [Start] after entering an IPv6 address existing on the network in [IPv6
Address] displays the result of the PING command on the touch panel display.
Pressing [Start] after entering the machine's host name in [Host Name] displays
the result of the PING command on the touch panel display.
If this result is inappropriate, check the settings described in "Interface Settings,"
on p. 2-9, and "TCP/IP Settings (IPv6)," on p. 3-18.